Pilbara Ports Authority: From Just Getting Started with Global Mapper to Saving Millions in Project Management

Dredging concept to expand port capcity
Lumsden Development Project – dredging concept to expand port capacity. Existing data manipulated in Global Mapper to develop ideas into a workable concept.

On 1 July 2014, the Port Hedland Port Authority in Western Australia merged with the Dampier Port Authority to form Pilbara Ports Authority. Pilbara Ports Authority stretches from the Port of Ashburton near Onslow in the south, to Port Hedland in the north, and includes the future Ports of Anketell and Cape Preston East.

The merging of these ports to form Pilbara Ports Authority incorporates the largest bulk export tonnage port in the world focused on the export of Australia’s rich mineral resources as well as world-class oil and gas operations. Pilbara Ports Authority has responsibility for safe and efficient shipping within its waters and for the overall planning and development responsibility for port lands. Its purpose is to facilitate and grow trade while protecting the environment and working with communities for the benefit of all Australians.

Pilbara Ports Authority is governed under the Port Authorities Act 1999 and operates as a corporation with a board of management that reports to the State Government of Western Australia’s Minister for Transport.

Challenges

Pilbara Ports Authority is the largest bulk export tonnage port in the world. With this responsibility comes a variety of coastal and harbor engineering challenges. While all are important, the most critical stage to maintaining or expanding a port is accurate dredging.

In late 2012 Frans Schlack, Dredging Manager for Pilbara Ports Authority was tasked with the Lumsden Development Project. The project involved designing a workable concept to expand port capacity. With over 40 years of experience as Dredging Manager, Schlack had managed several dredging projects over the year however he found himself in a unique situation where he could not depend on a survey department to carry out any survey or GIS work.

Challenges included the ability keep GIS work in-house and to work with data provided by surveyors using expensive marine application. Pilbara Ports Authority needed a software solution that did not cost tens of thousands of dollars but would work as a non-terrestrial, marine application and be able to handle highly accurate projection transformation for converting marine charts from WGS84 to GDA94. The tool needed to meet all of these requirements, without having a steep learning curve so Schlack could do the project himself.

“Being a non-surveyor or GIS trained person, I started from scratch with this program but its interface is so simple and makes so much ‘sense’, I learned very quickly.”
– Frans Schlack, Dredging Manager Pilbara Ports Authority

Solutions

Schlack first discovered Global Mapper because he needed a program that could change charts from WGS84 to GDA94 and then realized it could also be use on the Lumsden Development project. During the course of the project Schlack had some difficulties opening data created by other applications. He contacted the Blue Marble Technical Support Team and received a customized update of the software within 24 hours.

Using the enhanced version of Global Mapper, Schlack proceeded to change the original design of the Lumsden Development Project and was able to improve the design so that it complied with the targets and made sense from a dredging and reclamation perspective. He quickly became efficient with the software and was able to keep the entire project in-house due to Global Mapper’s simple and intuitive interface. The results were a savings of around $70 million in dredging costs alone but the overall savings compared to the original design came to $160 million.

About Global Mapper

Global Mapper is an affordable and easy-to-use GIS application that offers access to an unparalleled variety of spatial datasets and provides just the right level of functionality to satisfy both experienced GIS professionals and beginning users. Equally well suited as a standalone spatial data management tool and as an integral component of an enterprise-wide GIS, Global Mapper is a must-have for anyone who deals with maps or spatial data.

Key features in this case include: 3D processing/analyzing tools, ability to import over 250 data formats, Volume Calculation Tools, and Global Mapper’s renowned data handling capability allowed files from multiple sources to be converted and reprojected to ensure consistency and interoperability.

About Blue Marble Geographics

Trusted by thousands of GIS professionals around the world, Blue Marble Geographics is a leading developer of software products and services for geospatial data conversion and GIS. Pioneering work in geomatics and spatial data conversion quickly established this Mainebased company as a key player in the GIS software field. Today’s professionals turn to Blue Marble for Global Mapper, a lowcost, easy-to-use yet powerful GIS software tool. Blue Marble is known for coordinate conversion and file format expertise and is the developer of The Geographic Calculator, GeoCalc SDK, Global Mapper, LiDAR Module for Global Mapper and the Global Mapper SDK.

RealSim Ltd.: How a Leading Gaming Engine User Creates Terrain Models and More in Global Mapper

Global Mapper Terrain Tile
A Terrain Tile placed in the Unity 3D Terrain Editor.

RealSim provides highly realistic interactive 3D environment simulations for a range of clients and applications, including urban planning, marine simulation, and historical environment re-construction.

RealSim is passionate about the empowering potential of merging the technology of high-end gaming engines with 3D survey data and graphic design. The success of RealSim is built upon the skills and expertise of a talented team who collectively have over 20 years of experience in various 3D visualization and spatial technologies.

Challenges

RealSim environment simulations are built upon a popular middleware game engine, Unity3D, which is used by over 1 million game environment professionals around the world. RealSim has customized the platform to be equipped with various simple-to-use yet insightful spatial, lighting and scenario analysis tools.

One strength of gaming engines is their ability to process large volumes of 3D vector and raster information in real-time. When allied with physics engine technology for simulating environmental effects, gaming engines are an ideal platform for real-world environment simulation.

Gaming engines are not, however, equipped with gridding tools and thus do not readily import standard GIS terrain data. Height maps are required as a method of processing elevation data for a terrain surface in Unity3D. The height map is a top-down image mapping a specific area, but instead of using color photography, each pixel is a shade of gray. This gray does not contain an absolute elevation value, but represents a relative scale where a linear relationship is determined between the height of the terrain, and the shade of gray which is used. There are several ways to generate terrain data for use in Unity3D. The most accurate (loss-less) method of transferring spatial data into Unity3D is to export the data directly from a spatial mapping application, where this is supported. RealSim needed to find an application that could minimize the number of steps to convert from the 3D vector data available for a given location to the specific height map format required by Unity3D, while maintaining the integrity of the data and streamlining the process.

Solutions

RealSim started using Global Mapper in 2013 to develop a workflow to generate height maps for project locations, by gridding a terrain surface from 3D vector data. Video graphics cards, which are integral to how game engines efficiently process image data, work most efficiently when images contain pixels in ratios of 2 to the power of n, i.e. typically 512, 1024, 2048 and 4096. Terrain tiles are exported to fit one or more of these dimensions depending on the terrain resolution and area to be covered. The workflow also includes rescaling the terrain grid elevation values to fall within the range of 0 and 32767 and applying the Gradient Shader, without Hill Shading, to display the elevation values in greyscale. The data is exported as 16-bit GeoTIFF files, which are then converted to RAW files in Photoshop. RealSim also uses Global Mapper to export orthophotos that are tiled to the same spatial extents as the terrain tiles, so that both sets of data are aligned when imported into Unity3D.

“Pound for pound Global Mapper is the best value comprehensive terrain manipulation tool on the market.”
-Gavin Duffy, Managing Director at RealSim LTD

At the request of RealSim, Blue Marble Geographics has recently developed a tool to streamline this process. This new tool automatically scales the elevation values and directly exports the terrain data into RAW format. The resulting data is thus ready for immediate use in Unity3D. This custom enhancement to Global Mapper is available to all users and has significantly improved the process and minimized the number of times data is exported, thus maintaining the quality of the original data.

Benefits

“There are many GIS and geospatial software solutions on the market, but we chose Global Mapper because its terrain and gridding manipulation tools are at the core of its functionality,” stated Duffy. RealSim compared several products and found that pound for pound, Global Mapper has the best value for price. Global Mapper’s ease of use means that all of RealSim’s team, including non-GIS professionals, can easily start working on the project at hand. Since purchasing, they have expanded their use of Global Mapper to include creating terrain grids and applying custom shading, scaling data, generating tiles and creating customized coordinate systems.

3D simulation
RealSim created an interactive 3D simulation of Northern Ireland’s seabed using Global Mapper.

Example Project

RealSim was commissioned by Titanic Belfast in 2014 to create an interactive 3D simulation of Northern Ireland’s seabed, on display at the Ocean Exploration Centre. The simulation allows users to freely explore the seabed and some of its fascinating features, such as shipwrecks, giant sand waves, and a submerged lagoon, and shows how these features are mapped by modern survey technologies.

Using a large volume of seabed survey data collected off the coast of Northern Ireland, RealSim developed the 3D simulation using Global Mapper to process and import the data into Unity3D. The simulation is controlled by joysticks and contains two windows. The main window is a 3D seabed module color-shaded to reflect the depth. The seabed data contains a 5m resolution terrain model over the entire model area (approximately 80km by 5km). Within this there are areas of ultra-high resolution terrain gridded at 20cm to highlight particular points of interest on the seabed, including shipwrecks and unusual morphology like giant sandwaves. RealSim is currently in the process of extending the model to the east coast, visitors will soon be able to navigate the seabed along the entire coast of Northern Ireland. Almost 50GB of bathymetry data will be gridded and tiled using Global Mapper to create RealSim’s largest terrain model to date. To view this amazing project, watch this video titled “Titanic Ocean Exploration Centre Interactive 3D Seabed Simulation demo” below.

About Global Mapper

Global Mapper is an affordable and easy-to-use GIS application that offers access to an unparalleled variety of spatial datasets and provides just the right level of functionality to satisfy both experienced GIS professionals and beginning users. Equally well suited as a standalone spatial data management tool and as an integral component of an enterprise-wide GIS, Global Mapper is a must-have for anyone who deals with maps or spatial data.

About Blue Marble Geographics

Trusted by thousands of GIS professionals around the world, Blue Marble Geographics is a leading developer of software products and services for geospatial data conversion and GIS. Pioneering work in geomatics and spatial data conversion quickly established this Mainebased company as a key player in the GIS software field. Today’s professionals turn to Blue Marble for Global Mapper, a lowcost, easy-to-use yet powerful GIS software tool. Blue Marble is known for coordinate conversion and file format expertise and is the developer of The Geographic Calculator, GeoCalc SDK, Global Mapper, LiDAR Module for Global Mapper and the Global Mapper SDK.