Five Reasons Why You Should Attend a Blue Marble User Conference

Patrick Cunningham at BMUC 2018Chelsea E | Projections
Blue Marble President Patrick Cunningham welcomes attendees at the Blue Marble User Conference 2018 in Portland. He talked about the use of Global Mapper by organizations such as NASA, GolfLogix, BGC Engineering, and more.

 

On September 21, one of the most prestigious geospatial events took place!

 

via GIPHY

 

You guessed it! It was the 25th Anniversary Blue Marble User Conference.

So, there might be a chance that you haven’t actually heard of this event. That’s ok! I’m writing this to convince you that, whether you are a Blue Marble software user or not, you should know about this conference.

Here are the five reasons why you should join us at the Blue Marble User Conference next year:


Mike Childs at BMUC 2018Chelsea E | Projections
Mike Childs, the Global Mapper Guru, responds to a question from a conference attendee.

1. I’m there! … and Global Mapper architects, developers, and experts are too

Chelsea E | Projections
Channel Account Manager Myles LaBonte (left) and Blue Marble reseller Laurent Martin (right) after the Blue Marble User Conference. Laurent, who traveled almost 5,000 miles to attend the conference, says that he’s always felt like he is a part of the Blue Marble team.

Yes, I’m there running around taking pictures and recording video (and eating the food), but what’s more valuable to you are the software developers and resellers who are there to hear your questions and requests.

This particular Blue Marble User Conference was especially valuable because the Global Mapper guru Mike Childs and our international resellers were there. After the day’s presentations and software demonstrations were over, Mike answered questions and heard software  suggestions from attendees while our product manager jotted down the ideas.

It’s a part of Blue Marble’s core values to welcome and encourage users to be part of the development process. That user-to-developer communication is usually in the form of emails, but at a Blue Marble conference, users can communicate directly with the experts and know their ideas will make it to a discussion in our development meetings.


Larry Mayer at BMUC 2018Chelsea E | Projections
Larry Mayer presents on advancements in sonar and visualization technology for exploring the sea floor at the Blue Marble User Conference 2018 in Portland, Maine.

2. You will be inspired by presentations from distinguished GIS professionals

Did you know that scientists know more about the surfaces of Mars and the moon than they do of the Earth’s ocean floor – aka 75% of the world’s surface? I didn’t.

At this Blue Marble User Conference, Larry Mayer, Director of the School of Marine Science and Ocean Engineering and Director of the Center for Coastal and Ocean Mapping at the University of New Hampshire (phew! Long title!), delivered a presentation on the advancements in sonar and visualization technology for exploring the sea floor. He explained how the technology has helped in the discovery of 3,000-meter high mountains in the Arctic, D-day wrecks, the behavior of whales, and the history of climate through the impact of ice on the sea floor. He touted that investing in more ocean research would help us, people of the world, gain a better understanding of our planet.

Chelsea E | Projections
Ron Chapple, CEO of Aerial Filmworks, discusses his role in the making of the Pulitzer Prize-winning documentary “The Wall”.

Our second keynote speaker and CEO of Aerial Filmworks, Ron Chapple took attendees from exploring the deep with Larry to examining the Earth from above. Ron talked about the challenges that came with producing the Pulitzer Prize-winning documentary “The Wall”, which analyzes the impact of the proposed wall along the border between the U.S. and Mexico. His role in the project was to shoot aerial footage, over which he highlighted the location of the 2,000-mile long border using Global Mapper.

I was surprised to learn how difficult it was for the team of “The Wall” to accurately represent the curvy U.S.-Mexico border in the video.

My point is that BMUC includes amazing presentations by distinguished GIS professionals that give insight into projects that are relevant to the industry today.


David McKittrick at BMUC 2018Chelsea E | Projections
David McKittrick, Senior Applications Specialist, offers “Tips and Tricks” on how to use Global Mapper at the Blue Marble User Conference 2018 in Portland, Maine.

3. You will leave smarter and gain Global Mapper “Tips and Tricks”

In between presentations at this year’s BMUC, Senior Applications Specialist David McKittrick took a few minutes to share some “tips and tricks” on how to use Global Mapper. The tips ranged from how to use the multiview display, smooth contours, view data in Google Earth, and create a terrain cutaway.

David also presented on the recent release of Global Mapper 20 and the LiDAR Module, which offers streamlined map layout tools, the ability to create a point cloud from a 3D mesh, a new eyedropper tool for selecting features, dramatically faster loading speeds for working with vector files, and a lot more.

All of these demonstrations were followed by an opportunity for attendees to ask questions that would help them apply these techniques to their own projects.


Larry Mayer talking with BMUC 2018 attendeesChelsea E | Projections
Larry Mayer answers questions after his presentation at the Blue Marble User Conference 2018 in Portland, Maine.

4. You will eat with other GIS professionals and have a chance to win a prize

Geo-Challenge Tie Breaker
The Tie Breaker slide. Can you name all the countries that were once collectively Yugoslavia?

Throughout the day, drinks and snacks were available, and at noon we provided lunch. During lunch, we challenged our attendees to participate in a Where in the World Geo-Challenge, in which they were asked to guess the names of geographic features in a slideshow.

At this year’s BMUC, we came prepared with a tiebreaker question, since we expected that a room full of GIS professionals would easily be able to guess all of the features correctly. The winner of the challenge went home with a gift card to the Blue Marble Emporium.


Sam Knight, David McKittrick, and Mike Childs at BMUCChelsea E | Projections
Sam Knight, David McKittrick, and Mike Childs answer questions at the end of the Blue Marble User Conference in Portland, Maine.

5. You will spend only $25 to attend

So why wouldn’t you attend BMUC if it’s only $25 for a day full of GIS presentations, networking, and lunch?!

They had me at “lunch”, so … I’m not sure why you wouldn’t register.

Stay tuned for future Blue Marble User Conferences

All jokes aside, BMUC truly has a lot to offer GIS professionals, even if you aren’t a user of Blue Marble software. From the insights of our keynote speakers, to the latest software developments and one-on-one interactions with our experts, BMUC is a great opportunity to connect with Blue Marble staff, have a direct impact on the software you use, and to network with members of the GIS community.

So stay tuned for Blue Marble User Conferences near you by following us on Facebook, Twitter, LinkedIn, and Instagram, or by checking out Blue Marble User Conference page.


Chelsea Ellis


Chelsea Ellis is Graphics and Content Coordinator at Blue Marble Geographics. Her responsibilities range from creating the new button graphics for the redesigned interface of Global Mapper 18 to editing promotional videos; from designing print marketing material to scheduling social media posts. Prior to joining the Blue Marble team, Ellis worked in graphic design at Maine newspapers, and as a freelance photographer.

Blue Marble Monthly – LiDAR vs PhoDAR and Becoming a Pilot

Product News, User Stories, Events, and a Chance to Win a Copy of Global Mapper Every Month

For many, summer is a time for relaxing, for taking your foot off the gas, for being lazy. Not at Blue Marble. We are busy preparing for the next major release of Global Mapper in just over a month, planning our hectic autumn travel schedule, and making the final preparations for our 25th anniversary user conference here in Maine. In this edition of Blue Marble Monthly we formally invite you to join us at BMUC. We also hear from Sam Knight about becoming a licensed drone pilot; we discuss the differences between LiDAR and PhoDAR; and we challenge your geographic prowess in the Where in the World Geo-Challenge.

NEWS | BMUC is Coming to Portland, Maine

We hereby cordially invite you to Blue Marble’s home state for our User Conference (BMUC), as we continue to celebrate our 25th birthday. Not only will you have a chance to meet other users and learn about the latest software developments, but you’ll also hear from some interesting presenters including Ron Chapple who will be speaking about his work in the Pulitzer Prize-winning project, “The Wall”.

 

PROJECTIONS | Becoming an UAS Pilot

Ready for the kids to go back to school? Sorry, we can’t help you with that, but we recently sent our own Sam Knight back to school to learn what it takes to become a licensed drone operator. As we continue to develop tools for the UAV industry, it is essential that we have the first-hand knowledge of what is required. For Sam, this was a journey into unknown territory.

 

PRODUCT NEWS | Call for Beta Testers

Blue Marble’s development process has always relied on direct input from users and now you have a chance to be part of that process. Sign up as a beta tester today and we’ll let you know when a beta version of either Global Mapper or Geographic Calculator is available for you to put through its paces.

 

DID YOU KNOW? | LiDAR vs Photogrammetric Point Clouds

The Pixels-to-Points tool has caused quite a stir in the UAV industry. Creating a high-density 3D point cloud from a drone would have been unheard of just a few years ago. While the data may look and feel like traditional LiDAR, there are significant differences between the two formats. In a recent blog post, we outlined some pros and cons of each.

USER STORY | Planning Truck Stops with Global Mapper

In the latest Global Mapper case study, we hear from Michael Frings, General Manager of MFBI Technologies about how the LiDAR Module’s point cloud processing tools played a critical role in planning autobahn truck stops in Germany.

“The fact that the LiDAR Module is so powerful, giving us the ability to handle large point clouds, was the killer argument for us to go with Global Mapper.” – Michael Frings

 

 

VIDEOS | Can Your GIS Do This Without Extensions?

Simply stated, Global Mapper gives you more functionality for less money. Need proof? Take a look at this short video highlighting some of the terrain processing tools that are available out of the box in Global Mapper. No extensions required.

This and previous Blue Marble Webinars and Webcasts can be viewed at the Blue Marble YouTube Channel and on the Webinars page on the Blue Marble web site.

 

Where in the World Geo-Challenge

The geographic sleuths were once again hard at work in July. Most of you were able to identify all five locations in the Where in the World Geo-Challenge. The randomly selected winner of a copy of Global Mapper is Roy Mayo, a land surveyor from Mackay, Mackay, and Peters. If you are one of the handful whose response to the capital city question was, “Haven’t a clue” or words to that effect, check out the correct answers here then click the link below to see if you can do any better in August’s challenge.

 

See complete terms and conditions here.

EVENTS | Global Mapper Training in Houston

The Blue Marble training team will be hitting the road again in October with the next three-day Global Mapper class scheduled for Houston. Typically our Houston classes fill up fast so be sure to sign up as soon as possible to reserve your spot.

“Without a doubt, one of the most informative and enjoyable technical training classes I have ever taken.”
– Recent Global Mapper trainee